Gyp-Crete 2000®/3.2K Data Sheet
Product Description:
Gyp-Crete 2000®/3.2K is engineered to deliver compressive strengths up to 3,200 psi (22.1 MPa), also delivering enhanced resistance to surface abrasions and even faster drying time. It's ideal for use over wood & concrete subfloors as well as over Acoustical Sound Attenuation Mat in single-family, light commercial, and multifamily construction, as well as renovation projects. Its crack-resistant surface provides a perfect base for practically any floor covering.
Technical Data: Compressive Strength: Typical range of 2000 psi to 3200 psi
(14 MPa to 22 MPa)
'K' Factor: 5.15 Btu/(h·ft²·ºF) (.7416 W/[m·ºC])
Specific Heat: .222 Btu/(lb·ºF) at 85ºF
(.9301 kJ[kg·ºC] at 29.44ºC)
Weight: At 3/4", less than 7.2 lbs./sq.ft.
(At 19 mm, less than 35.2 kg/m²)
Dry Density: 115 lbs./ft.³ (1840kg/m³)
Point Loading: Typical loading of up to 2,500 lbs. on a 1"
(1135 kg on a 25.4 mm) diameter disc
Surface Burning Characteristics: Flame spread: 0
Fuel contributed: 0
Smoke density: 0
VOC: 0.12 mg/m³
'Green' Information:
USGBC LEED Credit Areas
Project Credit Category How Requirement is Fulfilled
Indoor Environmental Quality EQ 3.2 Construction Indoor Air Quality Management Plan GREENGUARD Certified (Field testing MUST be completed prior to claiming credit)
Materials & Resources MR 4.1 - 4.2 Recycled Content Fly Ash
MR 5.1 - 5.2 Local/Reg. Materials Manufactured in Blue Rapids, KS 66411; Las Vegas, NV 89035; Camden, NJ 08103; Brunswick, GA 31520; Job site manufactured with local sand & water
Code Listings:
ER-3433
ER 90-31
HUD951h
ESR-1153
ESR-1774
(NOA 05-0706.02)
Call or Email Dave - New Jersey Gypsum Floors
at (631) 484-0900 or Contact Dave@gypsum-newyork.com
Gypsum Floors Group Maxxon/Gyp-Crete Legacy company for over 35 years
