The low-profile sound control system. Increases IIC and STC levels up to 10 points over wood frame, and IIC up to 20 points over concrete. New Option: Acousti-Mat II "Green"
Material Composition: Nylon
Thickness: 1/4" (6 mm)
Density: 6.3 pcf (100.8 kg/m³)
Acousti-Mat II Color: blue with white fabric
Acousti-Mat II "Green" Color: black with white fabric; Optional water resistant fabric
Flammability ASTM E-84 Fuel Contribution: 0
Underlayment Depth: 1" (25 mm)


The original sound control mat. Increases IIC and STC levels up to 12 points over wood frame, and IIC up to 20 points over concrete. New Option: Enkasonic "Green"
Material Composition: Nylon
Thickness: .4" (10.2 mm)
Density: 4.65 pcf (74.4 kg/m³)
Enkasonic Color: black with white fabric
Enkasonic "Green" Color: black with white fabric; Optional water resistant fabric
Underlayment Depth: 1 1/2" (38 mm)



For super sound control even in open beam, concrete slab and conventional wood frame floor systems. Increases IIC and STC levels up to 17 points over wood frame, and IIC up to 25 points over concrete. New Option: Acousti-Mat 3 "Green"
Material Composition: Nylon
Thickness, nominal: 0.8" (20.3 mm)
Acousti-Mat 3 Color: blue with white fabric
Acousti-Mat 3 "Green" Color: black with white fabric; Optional water resistant fabric
Underlayment Depth: 1 1/2" (38 mm) plus wire mesh
Underlayment Depth with Maxxon CSM: 1 1/2" (38 mm)



The new, permanent solution for impact sound control in concrete construction. Achieves a Delta IIC of 19, that's approximately a 75% reduction in impact noise on concrete floor systems.
Material Composition: blend of polymeric fibers
Thickness: < 1/16" (45 mils)
Color: dark gray
Mullen Burst: >200 psi (1.4 MPa)
Air Permeability: 150 CFM (45.7 m³/min)
Gypsum Underlayment Depth: 1/2" (12.7 mm)



Corrugated Steel Deck Acousti-Mat CSD
IIC of 51 Over Marino / Ware Light 22 Gauge steel With Quary Tile
IIC of 53 Over Marino / Ware Light 22 Gauge Steel With Laminate flooring
STC of 57 db Over Marino / Ware Light 22 Guage Steel With Laminate or Quary Tile
Maxxon Underlayment Thickness 1 1/2" over the top of Mat
No Prefill of Fluted steel required